Valencian is a wood-look SPC floor in a light greige-beige shade, with a thick, high-traffic wear layer for a durable, easy-care finish.

Yes — 100% waterproof. Valencian handles pet accidents, water-bowl spills, and tracked-in mud wiped up promptly without swelling. Clean up standing water quickly. Not approved for outdoor installation.

This floor has a 20 mil wear layer — that's approximately 0.50 mm — appropriate for heavy residential use and many light-commercial applications, offering excellent protection against everyday scratches, scuffs, and abrasion. Noticeably thicker than the everyday layers below it.

Valencian's 20 mil wear layer and finish resist scratching and scuffing over years of use. It wipes clean with a vinyl-safe cleaner and a damp mop, and keeps the printed grain reading consistent across the floor.

Up close the plank surface is a printed wood-look with fine, straight grain lines running the full length of the board. Every so often a cathedral arch loops across a few boards, so the pattern carries quiet movement rather than a dead-straight repeat. There are no knots to break it up, so the figure stays clean and restrained, and the pale greige-beige tone reads evenly from one plank to the next.

There's no separate underlayment to buy and no pad to choose. Valencian's factory-attached 1.5mm IXPE anti-microbial acoustic pad comes bonded to every plank and dampens footfall noise throughout the home — one less material decision and one less install step.

Valencian reads as a light greige-beige, and just how light it looks depends on your room. Under the bright, many-windowed midday daylight it was photographed in, the beige lifts pale and its warm taupe keeps it from tipping cold or grey. In a lower-lit or north-facing room the same floor reads a shade deeper and quieter. Either way the neutral base takes both cool blues and warm leathers, which makes Valencian easy to build a palette around when you haven't fully committed to one yet.