Sunset Ivory is a rigid, wood-look SPC floor built around a medium brown color, with a thick, high-traffic wear layer for a durable, easy-care finish.

Yes — 100% waterproof. A splash at the sink or a dropped glass wipes up without harming Sunset Ivory when cleaned promptly; don't leave water standing. Indoor use only — outdoor installation is not approved.

The flooring uses a 20 mil wear layer — which works out to 0.51 mm — made for heavy residential use and many light-commercial applications, giving you excellent protection against everyday scratches, scuffs, and abrasion. It runs noticeably thicker than the entry-level wear layers.

Sunset Ivory has a 20 mil protective layer — thicker than the thin wear layers on entry-level LVT. That's the physical protective film above the print, sealed by finish.

Up close, each Sunset Ivory plank shows concentric cathedral arches at its center, loosening into tight, parallel edge grain along the rails. Dark pin knots scatter along the board edges at a moderate spacing, small enough to add character without crowding the face. The printed wood-look surface repeats this detail board to board, so the floor stays visually varied without any two planks fighting for attention.

The EVA acoustic layer damps the hollow "click" sound characteristic of floating floors. Sunset Ivory is quieter underfoot than LVT with a loose pad — both for the walker and for rooms below in multi-story homes.

Under the warm ambient light of an evening room, Sunset Ivory's caramel warmth turns richer and a little moody, the mid-brown deepening rather than washing out. Daytime window light lifts the same tone toward a softer honey-caramel, so the floor shifts gently between a relaxed daytime read and a warmer nighttime one. It suits rooms you want to feel intimate after dark without going heavy.